An air compressor is a great addition to any store and with proper care it will be a tool that will be a part of that store for many years. Regular maintenance includes the obvious things, such as changing the compressor oil, but equally important for the life and performance of your compressor is regular drainage of the air tank. Taking half an hour of your time to perform the draining task can extend the life of your tools for years.
Why compressor tanks should be drained?
The air contains water, and when it is allowed to cool in the compressor tank after it is compressed, part of this water returns to liquid and is installed in the lower part of the tank. Over a period of time, which can sometimes be as short as one day, the water level builds up and can be mixed with compressed air as it leaves the tank on its way to its air-powered tool. Vertical tanks especially may have reduced air storage capacity if water is allowed to accumulate over time. This capacity tool performance seriously affects a negative way.
How often the tank should be drained?
The compressor must be drained after each use. Especially on wet days, compressors make a lot of water. It remains in the tank this water does nothing but the oxide of the tank. Obviously, the problem is compounded when water is allowed to remain in the reservoir for prolonged periods of time. Read the manual that accompanies your compressor. best air compressor for home garage requires a minimum of maintenance. Before drain the air, you must release all the pressure that the device still contains, read on to learn how to drain an air compressor.
Engine: Oil drain to air compressors
There is a compressor where the engine is sealed and there is no need to add oil, if you have a compressor with an accessible engine unit, you should change the oil annually. The big compressor models are the most worried. Changing the oil in your air compressor is the most difficult task to maintain the efficiency of your compressor.
• Before starting to drain the compressor, turn it on for a few minutes to heat and dilute the viscosity of the oil so that it leaves the system easily.
• In addition, remove the filler cap to allow air to enter the system.
• Open the draining plug from the compressor opening and let the oil drain smoothly.
• Once all old oil has been removed, replace the drain plug with an adjustable wrench.
• After that you must pour carefully new compressor oil into the machine.
• Do not rush in this process. But, make sure that you have poured enough amount of compressor oil.
• Finally, replace the fill cap.
Tank maintenance to drain an air compressor
At the end of each day of use, you need to drain the bottom of the tank, to do this, there is a drain cock. Then, empty all the condensation that is collected during the day, because every time we put air under pressure, we create condensation. If the water remains at the bottom of the tank that is metallic, it will eventually oxidize.
According to the manufacturer’s instructions, it is necessary to check the condition of the air filter from time to time. Changing your air filter is incredibly simple. Some machines have a screw in the air filter and others are removed by hand. Locate the air filter of your machine. Remove the air filter either by pinching it with your fingers or by removing the screws. Installing the new filter should be easy.