How to fill paintball tank with air compressor?

Paintballs are guns that shoot paint balls through the use of compressed gas. Most paintballs are compressed carbon dioxide cartridges that push the pellets from the gun shaft to its destination. These CO2 cartridges must be replaced periodically as gas loses its compression. Because of the CO2 it can be expensive when a lot is used, some serious paintballs prefer to connect their marker up to a home air compressor when it takes target practice or shooting on its own. This can drastically reduce the cost of compressed CO2, but an extra attachment is required to connect a compressed air tank to a paintball gun.

Instruction to fill paintball tank

Connect the larger end of the paintball gun filler to the compressed air tank. Turn clockwise until the fill is screwed in firmly. It may be necessary to unscrew an existing hose connected to the compressed air tank. Connect the smaller end of the paintball gun filler to the refill end of your paintball marker. Make sure the marker’s air tank is tightly connected before proceeding to fill it. Open the air compressor air valve and fill the compressed air container of the paintball marker. Use the pressure gauge on the tank or the filling gun itself to determine when to stop filling. The exact PSI limit for air spray can of your paintball indicator may vary depending on its size and manufacturer.

Most containers have the maximum PSI printed on their exterior. Close the best air compressor for home garage air valve and remove the gun filler from the paintball marker and the compressor. Replace the tubes or plugs that were initially removed.

Air powered paintball guns are very popular

If you are going to buy a gas powered paintball gun, you must remember that there are two types of propellant tanks that are used. The first type of tank is the carbon dioxide paintball tank. This particular tank uses liquid CO2 to drive projectiles, such as paintballs. The liquid that CO2 will expand into gas that will create the energy that will push the paintball out of the barrel. However, the downside is that using this type of tank for long periods of time will produce ice crystals, inside the tank, which have a greater effect on the reliability of the gun in terms of speed and accuracy.

Plug the smaller end of the filler into the paintball gun to fill your paintball marker. Make sure the marker air tank is closely connected before proceeding to fill it.

How to refill the compressed air?

Open the air compressor air valve and fill the compressed air paintball marker tank. Use the caliber of the tank gun or self-fill to determine when to stop filling. The exact limit PSI for the paintball marker air box may vary depending on size and manufacturer. Most containers have the maximum PSI printed on their exterior. Close air compressor valve and remove filler from marker paintball gun and air compressor. Replace any hoses or plugs that were initially removed.

Advice and warnings

Ever since paintball was introduced to the world, it soon became very popular with weekend warriors who want to experience the excitement and excitement of fire. Most home air compressors have a maximum limit of 300 PSI – well below what a paintball indicator needs to effectively turn pellets. It is possible to buy a high pressure air compressor capable of feeding the gun, but it will come at a high cost which reduces the saving of compressed air. Make sure the compressed air release valve from the tank is completely turned off before removing the tank tube.

Hey, Just one more thing, We’re actively looking for expert to contribute to home improvement “write for us”, If you’re Interested, Please contact us!